What's new

Out the gate, out of control!

Hello all,
Thank you for allowing me as a new member here at B&B. I suspect some of you may know me "SixCats!" as a long time member of Basenotes.net (since 2003). I recently (very recently) started to collect vintage Razors. The reason being (in part) is I got sick and tired of paying for expensive Cartridge Razor Blades and I've read here and elsewhere that once you try the likes of a DE (old School) Razor, you'll never look back. I must say, these positive reviews/comments piqued my interest so, this past Sunday, I set out to search my local Flea Market for (some type) of old School TTO DE Razor. I can't believe my luck! The very FIRST table I approached had a nice condition old Razor sitting on the shelf. I was told it had just been put out for sale. Long story short, I paid eight dollars ($8.00) for this Razor. I took said Razor home, cleaned it up and it looks quite nice. So, after cleaning the Razor, I began my research on this Razor. Welly welly well, me thinks I got pretty lucky out the gate! I am now the owner of a vintage Gillette (marked) D4 FATBOY adjustable Razor. If memory serves, I believe it is circa 1958. I look forward to using this FATBOY as soon as my new pack of (one hundred) Blades arrive in the Mail. Since Sunday, I purchased THREE more Razors! (Stop me, I'm out of control). I found a near pristine condition H. Boker & Co. KING CUTTER Straight Razor.
It was in such nice condition, I just had to buy it. I don't know if I'll ever work up the Nerve to use a Straight Razor but, nevertheless, I'm glad I purchased the Boker (cost me $23.00). Today, I purchased two more vintage Razors, one is a vintage (Ball end) Gillette NEW "long Comb" which cleaned up beautifully. It does have two very fine hair line cracks at the Ball end which I didn't even notice until after I started researching this neat old Razor. I don't think it will negatively effect my using this Razor. I paid ten dollars ($10.00) for the "NEW". And.....last (but not least) I found a very nice condition Vintage Ever-Ready Improved Single Edge Safety Razor, 1912 Patent, Made In USA, Circa 1930 - 1933. I paid twenty dollars ($20.00) for this ultra cool Ever Ready. The Ever Ready looks like the one pictured (borrowed) here :

proxy.php


My Ever Ready isn't quite a shinny (yet). Condition wise, beautiful!
At any rate lol, I ramble. Thank you for allowing me to be part of this Club!
Ooh, now that I own THREE vintage Safety Razors, I'm wondering which one is going to give me the best shave ?
This should be fun!

Regards,

SixCats!
 
Hello all,
Thank you for allowing me as a new member here at B&B. I suspect some of you may know me "SixCats!" as a long time member of Basenotes.net (since 2003). I recently (very recently) started to collect vintage Razors. The reason being (in part) is I got sick and tired of paying for expensive Cartridge Razor Blades and I've read here and elsewhere that once you try the likes of a DE (old School) Razor, you'll never look back. I must say, these positive reviews/comments piqued my interest so, this past Sunday, I set out to search my local Flea Market for (some type) of old School TTO DE Razor. I can't believe my luck! The very FIRST table I approached had a nice condition old Razor sitting on the shelf. I was told it had just been put out for sale. Long story short, I paid eight dollars ($8.00) for this Razor. I took said Razor home, cleaned it up and it looks quite nice. So, after cleaning the Razor, I began my research on this Razor. Welly welly well, me thinks I got pretty lucky out the gate! I am now the owner of a vintage Gillette (marked) D4 FATBOY adjustable Razor. If memory serves, I believe it is circa 1958. I look forward to using this FATBOY as soon as my new pack of (one hundred) Blades arrive in the Mail. Since Sunday, I purchased THREE more Razors! (Stop me, I'm out of control). I found a near pristine condition H. Boker & Co. KING CUTTER Straight Razor.
It was in such nice condition, I just had to buy it. I don't know if I'll ever work up the Nerve to use a Straight Razor but, nevertheless, I'm glad I purchased the Boker (cost me $23.00). Today, I purchased two more vintage Razors, one is a vintage (Ball end) Gillette NEW "long Comb" which cleaned up beautifully. It does have two very fine hair line cracks at the Ball end which I didn't even notice until after I started researching this neat old Razor. I don't think it will negatively effect my using this Razor. I paid ten dollars ($10.00) for the "NEW". And.....last (but not least) I found a very nice condition Vintage Ever-Ready Improved Single Edge Safety Razor, 1912 Patent, Made In USA, Circa 1930 - 1933. I paid twenty dollars ($20.00) for this ultra cool Ever Ready. The Ever Ready looks like the one pictured (borrowed) here :

proxy.php


My Ever Ready isn't quite a shinny (yet). Condition wise, beautiful!
At any rate lol, I ramble. Thank you for allowing me to be part of this Club!
Ooh, now that I own THREE vintage Safety Razors, I'm wondering which one is going to give me the best shave ?
This should be fun!

Regards,

SixCats!

Hi SixCats!,

Welcome and those are some nice scores especially the fat boy at just $8... Jealous lol.

Sounds like you're going to get hopeless lost in this hobby lol.

Cheers and happy shaves.

Mawashi
 
Last edited:
Today, I purchased two more vintage Razors, one is a vintage (Ball end) Gillette NEW "long Comb" which cleaned up beautifully. It does have two very fine hair line cracks at the Ball end which I didn't even notice until after I started researching this neat old Razor. I don't think it will negatively effect my using this Razor.
It's possible that the cracks may enlarge and the handle falls apart.
If so, it can be repaired. See How to repair a crack in an Old Type handle
I did this to my Long-Comb New's handle, which was coming apart at both ends. I used a piece of aluminum mechanical pencil barrel for the internal splint. It turned out great.
 
Thank you all for my warm welcome to B&B. It's going to be fun! John, thank you for the VERY informative link for Handle repair.

SixCats!
 
You've picked up some nice razors. Just make sure you get coated SE blades for the Ever Ready, not the uncoated type. The latter are likely to give a terrible shave.
 
Welcome to B&B.
I await your review on the experience with all the razors you have acquired. You may want to stick with one razor initially until you have established a good technique.
 

KeenDogg

Slays On Fleek - For Rizz
Very nice to start! My first vintage was a New LC.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 
You've picked up some excellent razors, congratulations! Please keep us posted on how you like the shaves of each.
 
Welcome to the club you have the start of a very nice collection. As for which you should use first I’d crank that fat boy to a 3 or 4 and start there. Which blades did you order also? Good luck and happy shaving
 
Howdy! Word of warning. Shaving hobby...or Shopping hobby?

Have fun. Grab a brush and some soap. Watch some shaving videos. Remember, a very light touch is the secret. No pressure.
 
Welcome to B&B!

I shot you a friend request on Basenotes. When you try the Everready, you shave with the head almost flat against your face, unlike DEs and, as was mentioned, the PTFE coated SE blades are your best bet with it. The Fatboy was a steal!

Badger & Blade is a place to read up on SRs if you want to pique your interest on using your Boker.

You have a great selection for finding out what type of razor you like. I would just stick to one for a month 'til you get the hang of it.
 
Top Bottom