Help ! I have a Broke Down FatBoy

[Glockadoodadoo]

Does anyone know where I can find the rod - blade tray & end cap.

My newly acquired fatboy wouldn't give me that last " quarter turn " lock & it's seems that I went a little to far in turning it & breaking it at the rivet section that holds the blade tray.

 

[Maxime D.]

could you post pictures of the wounded ?

 

[Mike H]

I think you will need to find a sacrificial fb.
Does yours have the pressed on endcap?

http://vintagesaws.com/fatboy/fatboy.html
http://badgerandblade.com/vb/showthread.php/35634-Fat-Boy-Disassembly-Mysteries-Revealed!

 

[alex2363]

does it look like this at bottom? see the 2 little pin holes.....

 

[alex2363]

If it has pin holes (e1) then you can take it apart and replace the parts with another Fatboy...

 

[alex2363]

If it has no pin holes then u may be in bad luck

 

[Glockadoodadoo]

It is the pressed fit one. I believe I can save it barring finding another rod-blade tray. Or I'm pretty sure I could use the old school turn one also.

Some good info here on the press fit ....

http://badgerandblade.com/vb/showth...d-Slim-disassembly?highlight=slim disassembly

 

[alex2363]

It is the pressed fit one. I believe I can save it barring finding another rod-blade tray. Or I'm pretty sure I could use the old school turn one also.

Some good info here on the press fit ....

http://badgerandblade.com/vb/showthread.php/46559-How-To-Late-Fatboy-and-Slim-disassembly?highlight=slim%20disassembly

Good luck keep us posted