Titanium, suitable for atmospheric re-entry, but how would it go as a razor handle?

[Cap'n CutThroat]

The thread title says it all - has anyone made a titanium razor handle to suit the most popular heads?

Ti is probably the most tactile of metals & would make an absolutely superb handle.

 

[cb91710]

Not good without proper treatment.

Titanium is extremely light (perhaps not good for a razor handle), and touching raw Ti will leave a permanent fingerprint from the instant staining from your skin oils.

 

[ERVARGASNY]

Ok so how about a Treated and Filled handle for added weight ? Will that make a better Handle? Arent lots of ships made of this Material? And those bad boys are in Salt water for.years at a time? I think it would be an awesome Handle )

There was a Member on here a while ago that mentioned he had a solid rod of Titanium left over and was planning on making a razor handle out of it, dont know what happend to him but i did offer to buy a Bulldog handle style handle if he ever made one )

 

[maxman]

If Titanium is desirable because it's light, why fill the handle?

 

[amishmotorboat]

because then you can say you have a titanium handle.

 

[Crooswijk]

because then you can say you have a titanium handle.

 

[Haiku]

Why Titanium? Here's a link that explains why titanium might be chosen for an item. Ask yourself this: do any of these characteristics make any sense for a razor? The answer razors makers have come up with is "no" and that's why people simply don't use titanium for razors. None of the characteristics of titanium are needed for razors and so the cost and the inconvenience of using it outweigh the possible advantages. And there are no real advantages over brass, or steel, or zamac plated in chrome for that matter.

http://www.missionknives.com/why-titanium/

 

[maxman]

I think exotic woods would be cool.

 

[Derdonkderd]

No, titanium isn't used in most ship hulls, it is generally steel (of some sort, maybe HY-80) or high grade aluminum. Inconel is pretty hefty, corrosion resistant, and has a very nice dull-nickelish color, (it is also a bit more available than Titanium), that would make a very nice handle. As far as exotice woods, While I was stationed in Hawaii I lusted for a Koa and / or Mango wood ukulele. Thoses would make a great handle and brush.

 

[cb91710]

Arent lots of ships made of this Material?

No, it's not even a primary material in aviation.
It is used primarily where heat resistance and weight reduction are primary concerns, but for many aviation applications, the lower cost of aluminum wins out over Ti where heat resistance is not needed.

The most common place to find Ti is turbojet/fan/prop exhaust areas and internal engine components.

 

[MACGI98z28]

Stainless Steel makes a lot more sense from a weight and durability standpoint.

 

[UKMerk]

i had some Ti parts made for another hobby and from experience, its not cheap. The metal is very hard so machining is the biggest cost, add knurling and you can expect the handle to cost as much as a new 34c.

 

[RondeB]

Ti for bikes (when not using carbon) and camping equipment. It does have a certain cool factor though.

 

[Dr Dulcamara]

Hey folks. Only to say that Rafael (UFO Razor Handles) has introduced his UFO TiTAN handle in hobbyist forum. Hope it helps, and not be seen as advertisement, please.

 

[alex2363]

here are the specs


Titanium Grade 5 Alloy Ti6Al4V. 85 mm long. 15/15 mm caliber. 57 g. weight
Thread is M5x0.8. Gillette heads fit well, including the NEW head. The neck ends to 8.5 mm to fit perfectly.

I used my UFO aristocrat knurling, that in this material is clear and deep. This handle is plenty of grip. It is ideal for those who like the 15 mm caliber, but with a light weight. In steel, a handle like this weighs 103 g, and in Titanium, 45% less, 57 gr.

 

[Cap'n CutThroat]

Stainless Steel makes a lot more sense from a weight and durability standpoint.

I can't help agree with the above, but who is saying that sense has a look in here???

Ti is a very tactile metal & would just be COOL to use (just as others covet rare wood, bone & stone etc handles)

 

[Toothpick]

Why Titanium? Here's a link that explains why titanium might be chosen for an item. Ask yourself this: do any of these characteristics make any sense for a razor? The answer razors makers have come up with is "no" and that's why people simply don't use titanium for razors. None of the characteristics of titanium are needed for razors and so the cost and the inconvenience of using it outweigh the possible advantages. And there are no real advantages over brass, or steel, or zamac plated in chrome for that matter.

http://www.missionknives.com/why-titanium/

corrosion resistance
heat and cold stability
wear/abrasion resistance
tough
non-poisonous

nahhhh i don't want any of that stuff in a razor.

but yes i agree, brass and steel both do the same for a cheaper price.

 

[Kentos]

Don't knock it till you've tried it

http://badgerandblade.com/vb/showthread.php/345457-Hobbyist-DE-Razor-Showcase

 

[Kentos]

corrosion resistance
heat and cold stability
wear/abrasion resistance
tough
non-poisonous

nahhhh i don't want any of that stuff in a razor.

but yes i agree, brass and steel both do the same for a cheaper price.

Add exclusivity too.

 

[kcb5150]

Doesn't titanium shatter into hot, small shards when it shatters?