Injector Blades- Schick Pro-line B-20

[Henrik]

Been off and on the forum for years so please pardon if this question has been discussed before. Also I was not certain on which sub-forum where I should place this question.
Anyway- I need to stash some more injector blades. The Chicks are admirable although not really cheap in EU, I also got some packs of vintage Schicks. Good ones as well but they are running out.
With some work will the Schick Pro-line B-20 fit in an old metal dispenser?
I really don´t care much for blades that come with a plastic dispenser- finicky to work with is my take on these.
My main injectors are an E, F and G if that is of any concern of a fitting blade.
Thanks

 

[Whiterook]

I haven't tried, but it is my understanding that they will.

 

[Edinburgh]

Been off and on the forum for years so please pardon if this question has been discussed before. Also I was not certain on which sub-forum where I should place this question.
Anyway- I need to stash some more injector blades. The Chicks are admirable although not really cheap in EU, I also got some packs of vintage Schicks. Good ones as well but they are running out.
With some work will the Schick Pro-line B-20 fit in an old metal dispenser?
I really don´t care much for blades that come with a plastic dispenser- finicky to work with is my take on these.
My main injectors are an E, F and G if that is of any concern of a fitting blade.
Thanks

Although I have some old metal dispensers, I have yet to use them. Up until now, I have been using modern Chinese Schick dispensers to hold B-20 blades with absolutely no issues.

 

[ErkRusselReserve]

If you are looking for a bulk purchase, the Japan Schicks are pretty awesome and can if buy a good bit, the shipping is not too bad from Amazon JP, the IIs are just a few ducats more:

https://www.amazon.co.jp/-/en/dp/B01N7VULG1/ref=sr_1_2?crid=1R0S4AW2OLGO1&dib=eyJ2IjoiMSJ9.Q6UuD1hS-I9VlOsoHzdAOxr2bXRYOtxQDwajhcClhqUaxgi0hjqGM2iNtrGp2g8d_hcdtxCIuYhMdDSLOB716whb8tYPTrTY4fofywOkcIhpwbttslhgijGc0NP_ayr2HYWGYObeMGWEGusMKhD35vjL1NiZ2X6E9LMd73w8-iclNkaGqmO2ahJFoE3jVaHIpT2fMD2jCQuYgsIPeN6pJWKUNFgkW7_zAKBgr2H_UKR4WevbSS_MGlGJlsxDWtLnPViuPKqAVUegGzCMg7N_OeLVrlFrWtyfbBcFQwlnOUM.rl0sqlJtdJmka4pdejNkydXa1XEWCsEbMBUa0b0QdjU&dib_tag=se&keywords=schick+injector&qid=1708914024&sprefix=schick+inject%2Caps%2C193&sr=8-2

 

[Saxonbowman]

If you are looking for a bulk purchase, the Japan Schicks are pretty awesome and can if buy a good bit, the shipping is not too bad from Amazon JP, the IIs are just a few ducats more:

https://www.amazon.co.jp/-/en/dp/B01N7VULG1/ref=sr_1_2?crid=1R0S4AW2OLGO1&dib=eyJ2IjoiMSJ9.Q6UuD1hS-I9VlOsoHzdAOxr2bXRYOtxQDwajhcClhqUaxgi0hjqGM2iNtrGp2g8d_hcdtxCIuYhMdDSLOB716whb8tYPTrTY4fofywOkcIhpwbttslhgijGc0NP_ayr2HYWGYObeMGWEGusMKhD35vjL1NiZ2X6E9LMd73w8-iclNkaGqmO2ahJFoE3jVaHIpT2fMD2jCQuYgsIPeN6pJWKUNFgkW7_zAKBgr2H_UKR4WevbSS_MGlGJlsxDWtLnPViuPKqAVUegGzCMg7N_OeLVrlFrWtyfbBcFQwlnOUM.rl0sqlJtdJmka4pdejNkydXa1XEWCsEbMBUa0b0QdjU&dib_tag=se&keywords=schick+injector&qid=1708914024&sprefix=schick+inject%2Caps%2C193&sr=8-2

It's funny the description says both the single and double blades are made in the US.

 

[ErkRusselReserve]

It's funny the description says both the single and double blades are made in the US.

Correct. I am not sure who makes them. Must be Personna but perhaps with an extra step of refinement. AFAICT from others, there is a difference between Personna and the Japan Schicks.

 

[IoanPop]

Been off and on the forum for years so please pardon if this question has been discussed before. Also I was not certain on which sub-forum where I should place this question.
Anyway- I need to stash some more injector blades. The Chicks are admirable although not really cheap in EU, I also got some packs of vintage Schicks. Good ones as well but they are running out.
With some work will the Schick Pro-line B-20 fit in an old metal dispenser?
I really don´t care much for blades that come with a plastic dispenser- finicky to work with is my take on these.
My main injectors are an E, F and G if that is of any concern of a fitting blade.
Thanks

Do you cut Schick Pro-line B-20 to the Schick injector length? Do Feather AC blades work in a Schick injector if they are cut to the specific length?