That hold 1 Razor, 1 Brush, Has area to dry Blade in Use, has holder to hold up to 10, or just 5 blade in Paper.
3-D Printed, Wood, or ?
3-D Printed, Wood, or ?
Multi-Pourpose Shave Stuff Stand, anything like this available?
- Thread starter DesertIguana
- Start date
This is what I use.
But, Etsy has a TON of stands that hold razors, brushes and all kinds of extras, some wood, some 3D printed and some formed plastic.
There are literally hundreds of different ones there.
But, Etsy has a TON of stands that hold razors, brushes and all kinds of extras, some wood, some 3D printed and some formed plastic.
There are literally hundreds of different ones there.
- Thread starter
- #3
I use a Wal-Mart plastic Pencil Box, want Stand to hold some stuff.
I have several designs that can hold some of the gear. I suppose I could incorporate them into a one do-it-all design. I'll see what is possible.
Below are some of the items I've designed over the years.
Below are some of the items I've designed over the years.
Ron R
I survived a lathey foreman
This works OK but is light in weight so I will put a little pressure on base to keep every thing from moving when removing brush or razor.
I installed a # blade use counter on back just to make it more versatile a stand. I use it more for a storage of my Yaqi Black marble silvertip badger and my Oneblade razor, large rotation of razors and brushes keeps me from showing it more often.
Have some great shaves!
I installed a # blade use counter on back just to make it more versatile a stand. I use it more for a storage of my Yaqi Black marble silvertip badger and my Oneblade razor, large rotation of razors and brushes keeps me from showing it more often.
Have some great shaves!
I like your blade use counter!
Cool designs! Great work!
I have 3 of those; they work well other than being light weight and move around easy but do what you do and hold base to keep from moving around.
- Thread starter
- #9
Nice ideas too bad you do not sell.
Ron R
I survived a lathey foreman
The only thing that comes to mind would find a wider heavier base plate and contact cement it to existing stand for stability should help possibly.
You could glue rare earth magnets on the bottom of them and set them on something metal.
Respectfully, Ron, I'm going to steal your blade-use counter idea and incorporate it into my next shaving accessory design.
Seeing rons idea pre zoom in i thought it was a guitar or amp knob..... one of those would work well also and would be fun for those musically inclined
Something like this
Imho old pipe stands can be easily converted to serve the purpose of a kind of catch all for shaving
Like this one you could keep 3 razors on the one side 3 brushes on the other and use the wooden center humidor bit for blades etc..
Like this one you could keep 3 razors on the one side 3 brushes on the other and use the wooden center humidor bit for blades etc..
I use an old spoon rack to store razors on the wall since my bathroom doesn't have a ton of extra space.... but one like is pictured here might hold a couple brushes on the shelf bit and blades in the drawer in addition to razors in the old spoon slots
Ron R
I survived a lathey foreman
Right on Roger, hope you post it here and over a few other forums. I like your 3D razors and other shaving products you have created over the years. If a person did blade count their shaving results quality should improve instead of pushing a blade to the point of not so enjoyable results.Respectfully, Ron, I'm going to steal your blade-use counter idea and incorporate it into my next shaving accessory design.
Similar threads
