What to do with this? It holds together and you can shave with it, but looking at that crack is not fun.
Cracked 1920 Bulldog
- Thread starter erudolph
- Start date
If your tired of looking at that crack send it to me
Or you could have Bob's Razor Works make you a handle
I would try to glue it back together and see how it goes.
- Thread starter
- #5
Another sadly cracked little beauty.
- Thread starter
- #6
But the handle is it...
Maybe some type of solder or welding could fix it- sorry about your razor.
Careful application of some two part epoxy (i.e. double bubble) or perhaps Gorilla Glue?
- Thread starter
- #9
The handle wall is very thin. I'm wondering how to apply enough pressure to make a good glue bond at the edges without deforming the cylindrical shape? Also, would you glue with the head inserted, or try to force it in after gluing the handle?
Definitely that one. You may even need to sand the inside if it won't go back together, but at least everything is stuck together.
I know that feeling
How about using zip ties to hold the handle together after putting on the epoxy? Then using a small dowel to push excess glue out before it hardens, and leaving it crack side down to dry? After the epoxy dries, you remove the zip ties and put the razor together (hopefully).
Just thinking here, as I have a razor with exactly this problem...
Just thinking here, as I have a razor with exactly this problem...
I'm thinking that tube is history.
You can buy 3/8 brass tubing with .030 thick walls at most good hardware store.
Of course you'll be loosing the bulldog knurling.
You can buy 3/8 brass tubing with .030 thick walls at most good hardware store.
Of course you'll be loosing the bulldog knurling.
- Thread starter
- #14
I know that feeling
Oh no.... can't sell it, but it still shaves, right?
Thanks Bob, but I still think the original handle has some charms...
Ed, That sure does sadden me t see that razor look like that. I don't think glue will help. It will just make a mess. Set it in it's case, crack down and enjoy it. When you shave, simply turn the crack from eye sight so you don't think of it. Sooner or later you'll find a replacement for the set. Everything else looks to be in great shape.
It's interesting that it is such a great looking razor, other than the crack!
- Thread starter
- #17
I think I can just shave with the darned thing. It's in pretty good shave-shape in spite of the crack. Didn't come as part of a set though, but as part of a lot of odds and ends. I think the one thing that I can really use out of the lot is a good condition case for a slim adjustable!
Anyone need a beatup blade stropper...
Oh no.... can't sell it, but it still shaves, right?
Yes, I glued the handle at the upper side so it won't fall apart.
Begin with the empty cylinder/barrel. Thin glaze of 2 part mixed clear waterproof epoxy on both sides of the crack. Now, 3 or 4 short lengths of thin plastic coated electrical wire. Manually twist one at the top and one at the bottom of the cylinder. Take a pliers and carefully keep twisting till the two sides of the crack join. Now repeat with the 3rd (and 4th if necessary) length of wire. Clean off excess glue. Devcon makes excellent 2 part epoxy. (DO NOT USE Gorilla, dries ugly brown. Great stuff but not for razors.)
Now at this point you'll have to decide whether to put the open comb head piece in. I see pluses and minuses. You will never get it out, but you will never have to. By putting it in, it could cause the seam to separate, so you may have to re-twist the lashing wires. If you don't put it in, it may be a tight squeeze after the epoxy is dry. And if you force it in, you may re-crack the barrel. Have fun. I think I'd put it in before the glue dried and relash. A bird in hand. Enjoy. Do it!
Now at this point you'll have to decide whether to put the open comb head piece in. I see pluses and minuses. You will never get it out, but you will never have to. By putting it in, it could cause the seam to separate, so you may have to re-twist the lashing wires. If you don't put it in, it may be a tight squeeze after the epoxy is dry. And if you force it in, you may re-crack the barrel. Have fun. I think I'd put it in before the glue dried and relash. A bird in hand. Enjoy. Do it!
Similar threads
