A Logical restore for SRP's very own Logistics....
Every now an then, you just have to say ***... and that is what Travis said the other night in chat... After I popped this Boker "Pearl" loose everything just kind of started falling apart...
First those old Boker Bakelite scales couldn't handle the rusted pins coming loose, then the MOP tang covers were cracked to pieces under the scales so they more or less crumbled off there...
View attachment 78110
So looking at this, we needed an idea, Travis came up with a good one
"Do whatever you want Glen" 
So I took one day just to think about it, and came up with this idea, why not use the Midnight acrylic that I loved on another Boker I did last year, except carry it straight through to the covered tang too...
So first I cleaned up the razor, then using epoxy I glued on the very thin tang covers... At the same time I set up the scale blanks and let this all sit in the shop in the vice to dry....
Today I started sanding and shaping using my belt sander and a Dremel with a sanding sleeve on there... I made the scales and sanded the tang covers to fit.. I sanded the scales and the tang covers to 12k using micromesh and then some PlastX polish...
I used NiAg pins with SS and Brass washers and a matching acrylic wedge...
Anyway here is a fully restored 5/8 Spike point Boker "Pearl" razor with matching Midnight Acrylic Scales and Tang...
Oh BTW the best part of this story is I should be able to hand deliver this one in Denver on Tuesday....
View attachment 78114
View attachment 78111
View attachment 78113
Every now an then, you just have to say ***... and that is what Travis said the other night in chat... After I popped this Boker "Pearl" loose everything just kind of started falling apart...
First those old Boker Bakelite scales couldn't handle the rusted pins coming loose, then the MOP tang covers were cracked to pieces under the scales so they more or less crumbled off there...
View attachment 78110
So looking at this, we needed an idea, Travis came up with a good one
"Do whatever you want Glen" So I took one day just to think about it, and came up with this idea, why not use the Midnight acrylic that I loved on another Boker I did last year, except carry it straight through to the covered tang too...
So first I cleaned up the razor, then using epoxy I glued on the very thin tang covers... At the same time I set up the scale blanks and let this all sit in the shop in the vice to dry....
Today I started sanding and shaping using my belt sander and a Dremel with a sanding sleeve on there... I made the scales and sanded the tang covers to fit.. I sanded the scales and the tang covers to 12k using micromesh and then some PlastX polish...
I used NiAg pins with SS and Brass washers and a matching acrylic wedge...
Anyway here is a fully restored 5/8 Spike point Boker "Pearl" razor with matching Midnight Acrylic Scales and Tang...
Oh BTW the best part of this story is I should be able to hand deliver this one in Denver on Tuesday....
View attachment 78114
View attachment 78111
View attachment 78113
Nice!
Not enough scale restorations are done in blue, IMO, which complement steel beautifully. 
