What's new

new to face-lathering: one month report

I’ve been face-lathering exclusively for a month now, and I’ve decided to write up a short report on my experience with a few observations on the products I chose.

Never having face-lathered or used a soap stick before, I found that applying product and building lather directly onto my face took a little getting used to. At first, I had a problem knowing how much soap I was supposed to be rubbing on my face. As many of you experienced face-latherers probably predicted, I didn’t apply enough product on my first shave. I made sure to rub plenty of the stuff on my beard area after that. Then the problem became not knowing how much water to add during the lather-building. I ended up with a lather so thick that it clogged the razor. But little by little, with each passing shave, I figured it out. You have to add just enough water by dipping the brush tips in water--and you have to spend just enough time lathering--so that you fully incorporate all the soap into the lather and get a good, slick lather on your beard and in the brush. After a month of practice, I can now quickly whip up a good lather that's good for three passes.

I really like the products I chose: a Simpson Duke 2 brush and a Speick soap stick. I’ve heard that the Simpson Duke 2 was purposely designed for face-lathering; I don’t know if that’s true or not, but it certainly seems like an ideal brush for it. The knot is dense and stiff with plenty of backbone. The loft and handle are short. These characteristics make the brush very controllable, with a firm, exfoliating bloom. Yes, you can use any brush for face-lathering, but I can tell you right now that I wouldn’t want to use my Vulfix 2234 for face-lathering. It’s a big, floppy brush more suited for bowl-lathering softer creams. I think it would be less wieldy and would take longer to build the lather correctly on the face with the 2234. An interesting characteristic of the Duke 2 I’ve discovered is that the knot is so dense that the lather doesn’t penetrate into it very deeply. This makes cleanup quick and easy since I don’t have to run the knot under a strong stream of water to get all the lather out.

With regard to the Speick stick, after a month of use I can say that I really, really like it. I know that some folks don’t like the design of the Speick stick, with its foil covering and lack of a twist-up tube dispenser, and some folks don’t like the scent. I don’t mind peeling off a little foil every few days; the foil is thin and comes off easily. As for the scent, I absolutely love it. It is very classic--possibly too classic for some younger men. I remember reading a post here a while back in which a member wrote that his girlfriend told him he smelled like “a man from the 50’s” when he used the Speick stick. The smell is spicy and classic and a bit old-fashioned, but I love it. Of course, a shaving soap/cream is not only about scent; it’s also about performance. And the performance of the Speick stick has been excellent, in my experience. Once you get it down (and it does take some time and practice if you are not used to soap sticks or face-lathering), it makes a fantastic lather.

Here’s my new routine:

  1. Dip the tip of the soap stick in the hot water and set it on the counter to soften up, then put the brush in a bowl and run it under hot water. Take a shower.
  2. After I finish my shower, the brush and soap will be ready to use directly. Dip the tip of the soap stick in the hot water again, and it is ready to go. Rub it all over the beard area.
  3. Take the brush out of the bowl of hot water and shake it out well. Begin brushing vigorously all over the beard area to incorporate all the soap and turn it into lather. This has the additional effect of exfoliating and stimulating your beard and skin. While doing this, the brush will quickly turn the soap into a very thick lather, possibly pasty and not sufficiently hydrated. Just dip the tip of the brush in hot water occasionally and continue to vigorously attack the beard until you’ve got the lather consistency you want. The brush should be loaded with enough good lather for two passes, too.
  4. Shave as usual.

Cheers,

Mag
 
Sounds like you have it down pretty well. I face lather with soaps (williams, RazoRock) and creams TOBS etc etc and all work well. Looks like you are well on your way to becoming a dedicated Face Latherer <G>. Enjoy
 
So if you want to do a third pass (and possible a touch up pass in only a few select areas) you have to start over again making the lather? This is what prevents me from face lathering. I can make enough in a bowl to get me three full passes, and I can squeeze lather from my brush for a couple touch ups. I do not think I have time to face lather unless I simply did two passes (which my face may thank me for anyway! :biggrin1:).

Cheers
 
So if you want to do a third pass (and possible a touch up pass in only a few select areas) you have to start over again making the lather? This is what prevents me from face lathering. I can make enough in a bowl to get me three full passes, and I can squeeze lather from my brush for a couple touch ups. I do not think I have time to face lather unless I simply did two passes (which my face may thank me for anyway! :biggrin1:).

Cheers

I'll repeat what was said to me months ago when I mentioned this very thing...and with all due respect.

The soap is RIGHT THERE. I mean, you've just lathered up, done 2 passes, and you need more soap, it's RIGHT THERE, swirl the brush on it...it's RIGHT THERE...need more lather, the soap is RIGHT THERE...there isn't a Shaving Manual of Right & Wrong that says you MUST get all your passes out of the one "loading".

I can't remember who it was but I have face lathered ever since. If I'm going to build lather, why not do it on the face. Even with a really small knot you still should be able to load enough for 3 passes but even if you don't....well, you know where the soap is...

Getting off my high-horse now. Sorry lads.
 
I can't remember who it was but I have face lathered ever since. If I'm going to build lather, why not do it on the face. Even with a really small knot you still should be able to load enough for 3 passes but even if you don't....well, you know where the soap is...
Completely agree. I usually only do two passes, but I have always had enough lather. If you can build lather in a bowl, you can build lather on your face.
 
So if you want to do a third pass (and possible a touch up pass in only a few select areas) you have to start over again making the lather? This is what prevents me from face lathering. I can make enough in a bowl to get me three full passes, and I can squeeze lather from my brush for a couple touch ups. I do not think I have time to face lather unless I simply did two passes (which my face may thank me for anyway! :biggrin1:).

Cheers

I don't rebuild the lather. There is enough in the brush for two more passes, but keep in mind that this could be due to the quality of the water, the particular soap I'm using, or other factors. Let the lather on your brush be your guide. If it looks like it's good for more passes, then use it. If not, rebuild. As the above poster stated, the soap is right there, so don't be afraid to use it. They will sell you more if you run out.
 
Last edited:
I started face lathering shortly after starting on DE shaving. Since then, I've had a hard time understanding why anyone would ever use a bowl. But such is wet-shaving's rich pageant.
 
The soap is RIGHT THERE. I mean, you've just lathered up, done 2 passes, and you need more soap, it's RIGHT THERE, swirl the brush on it...it's RIGHT THERE...need more lather, the soap is RIGHT THERE...there isn't a Shaving Manual of Right & Wrong that says you MUST get all your passes out of the one "loading".

I used to be in the other camp, but I am now fully in this camp. Whether I need more lather or not, I will always re-dip the brush in a cream or do 2-3 swirls on a soap before the 3rd pass. You don't have to rebuild the lather, it's already there. It just adds a little extra protection. I'll be dead before I can use up all my soaps and creams so why be stingy with them.
 
So if you want to do a third pass (and possible a touch up pass in only a few select areas) you have to start over again making the lather? This is what prevents me from face lathering. I can make enough in a bowl to get me three full passes, and I can squeeze lather from my brush for a couple touch ups. I do not think I have time to face lather unless I simply did two passes (which my face may thank me for anyway! :biggrin1:).

Cheers
No, Chris. It's faster. I use a stick and apply it liberally on my face and also apply some on my brush tips. Work the lather on your face, rinse after each pass and work up lather. If you need more product or water, then add; only takes a few seconds. Never have understood the obsession with how much lather is available on the brush. Add what you need. There are no rules. No penalty for unsportsman like conduct.
 
Top Bottom