I don't have pics, but right now I'm working on an Ever Ready 100 with a red top and "yellow" bottom (I believe its really white). Anyway, its in two pieces. I glued the crack in the top, and sanded out a dremel gouge that were both my fault. I wet sanded a little on the bottom, and its turning from yellow to an off white or bone color.
Anyway, I don't want to lose the logo or the patina, and there are still knicks and such. Should I just finish up my sanding, hit it with some polish, and call it good? I've got 800, 1000, and 2000 grit paper, and Meguiars PlasticX.
What about coloring in the letters? I don't even know the knot size I'm going to get yet, as I don't have a caliper.
Anyway, I don't want to lose the logo or the patina, and there are still knicks and such. Should I just finish up my sanding, hit it with some polish, and call it good? I've got 800, 1000, and 2000 grit paper, and Meguiars PlasticX.
What about coloring in the letters? I don't even know the knot size I'm going to get yet, as I don't have a caliper.