Agreed. As long as it stays cleaned, I’ve never had any issues.
Yep, clean revolvers are almost as reliable as dirty Glocks.
(I'll show myself out...)
Agreed. As long as it stays cleaned, I’ve never had any issues.
Agreed. As long as it stays cleaned, I’ve never had any issues.
Sorry, meant to add you to my reply.What do you think of it’s trigger pull and accuracy?
Trigger pull is heavy but, that’s what I like about it. I can hit a plate sized target at 25 yds, which I’m happy with.
Back in the ‘80s when I was in the Army, my platoon was tasked to test a new side arm. Glock was one of those weapon platforms. We put that thing through h*** and back, and it out-performed the others. I don’t have any doubt that a dirty Glock will perform well.Yep, clean revolvers are almost as reliable as dirty Glocks.
(I'll show myself out...)
I did it again. I now see on the website that they have it in 9mm. In my experience, the 9mm round is best suited for an auto loading pistol. But, I haven’t made any new purchases in about 8 years so, there is probably a lot of advances that I’m no aware of.It seems the LCR in 9mm is harder to find than .38 and pricier when you do find it.
For a non-moon clipper, probably this:I wonder how difficult it would be to find a speed loader for a 9mm revolver that doesn’t use moon clips?
Yes. They spoil you. Minimal to no maintenance, easy disassembly, take lots of abuse, load with any round and they still go "boom" every time.Back in the ‘80s when I was in the Army, my platoon was tasked to test a new side arm. Glock was one of those weapon platforms. We put that thing through h*** and back, and it out-performed the others. I don’t have any doubt that a dirty Glock will perform well.
Just like anything else, there are advances in design and technology. I agree, they aren’t pretty but, for me… they have always fit me like a glove. The Gen 5 is much more comfortable than the 3, in my opinion.Yes. They spoil you. Minimal to no maintenance, easy disassembly, take lots of abuse, load with any round and they still go "boom" every time.
On the flip side, they are ugly as sin, and have the ergonomics of a plastic brick. At least my Gen 3's do, the newer ones with removable back straps may be more comfortable to hold.
Just like anything else, there are advances in design and technology. I agree, they aren’t pretty but, for me… they have always fit me like a glove. The Gen 5 is much more comfortable than the 3, in my opinion.
Nothing wrong there. I still have my 17 that I’ve had since 1989 and it’s still straight as ever. I replaced a few parts from time to time but, I’ll never part with it.Oh, I am sure. Not getting one, though, as I am holding on to my Gen 3s. They are slowly getting into "vintage" territory...
I far prefer my S&W M&P Bodyguard 380 )pauses to catch my breath) and actually it's what I'm carrying today.Your post makes sense to me. While there are other small pocket pistols out there, I don’t think there is a comparable brand to compete with the round capacity of Ruger’s LCP Max.
I need to try S&W’s Bodyguard .380 and see how I like their true double action trigger.
Oh, I am sure. Not getting one, though, as I am holding on to my Gen 3s. They are slowly getting into "vintage" territory...
I far prefer my S&W M&P Bodyguard 380 )pauses to catch my breath) and actually it's what I'm carrying today.
View attachment 1810284
I did it again. I now see on the website that they have it in 9mm. In my experience, the 9mm round is best suited for an auto loading pistol. But, I haven’t made any new purchases in about 8 years so, there is probably a lot of advances that I’m no aware of.
Makes sense to me. I haven’t done the research but, that’s something worth looking in to. 9mm is certainly more available and, less $$ from what I see.I think there are a couple of pro’s the 9mm can bring to a small snub nose revolver that is used strictly for up close self defense?
1. For starters, everything I read is, the 9mm is ballistically superior to .38?
2. Just the smaller overall compactness of the 9mm compared to the .38, means the cylinder doesn’t have to be as long as a .38? Which then means the revolver’s frame that houses that smaller cylinder can in turn be smaller and more compact?
3. Not only will 9mm moon clips can do double duty as small and easy to carry speed loaders, which can speed up and simplify for a quicker smoother reload?
4. I also would think, the much shorter 9mm cases would extract easier and quicker than the longer bulging spent cases of .38 when ejecting them?
This is my theory anyway and I’m sticking to it….
Six rounds.How many does it hold in it’s magazine?
1) Generally the same characteristics, until you get into the ++P+ subgun rounds that beat autos badly, but you can shoot everything from "poof" subsonic rounds to the hot-n-spicey with no reliability worries.I think there are a couple of pro’s the 9mm can bring to a small snub nose revolver that is used strictly for up close self defense?
1. For starters, everything I read is, the 9mm is ballistically superior to .38?
2. Just the smaller overall compactness of the 9mm compared to the .38, means the cylinder doesn’t have to be as long as a .38? Which then means the revolver’s frame that houses that smaller cylinder can in turn be smaller and more compact?
3. Not only will 9mm moon clips can do double duty as small and easy to carry speed loaders, which can speed up and simplify for a quicker smoother reload?
4. I also would think, the much shorter 9mm cases would extract easier and quicker than the longer bulging spent cases of .38 when ejecting them?
This is my theory anyway and I’m sticking to it….