What's new

Wilkinson Sticky deassembled

R

romsitsa

Hello,

first of all, the Sticky is not supposed to be deassembled, it's a hit or miss.
The only way to get inside is fully open the razor and further force the TTO knob in the opening direction. This will break the retaining ring at the end of the center rod and partially push the TTO knob from the handle. Turn the TTO knob until the head assembly clears the base plate, now the center rod can be simply unscrewed.
Pull out the TTO knob and retaining spring (this looks like stapler pin) from the handle.
Insert a thin rod into the TTO knob (avoid any contact with the threads) and gently hammer out the quality seal. The retaining ring will be most likely stuck in the grease inside the seal, don't lose it as this holds the center rod inside the handle.
To remove the base plate, use a thin flat metal object, like a knife blade, and pry it out from the plastic handle.

Parts breakdown:

Left row: base plate, plastic handle
Center: quality seal, retaining spring (hold the TTO knob in place), retaining ring (holds the center rod and head in place)
Right:center rod with door assembly, TTO knob

IMG_6071.JPG

Adam
 
Last edited by a moderator:
Top Bottom