Where to pic up SIC powder to lap an Ark

[KW Driver]

anyone have a good, recommended source to find some, or is the Home Depot/Loews good enough.

turns out my pen knife trans isn't as lapped as I thought it was and need to get it there.

thanks

 

[timwcic]

If you do not want you go the wet/dry sand paper route,

http://gotgrit.com

Is a good source.

 

[KW Driver]

I just assume based on reading I'd run through too much wet/dry. thanks for the link.

 

[kcb5150]

Have always bought from here

http://mineralabrasives.com

 

[KW Driver]

so, bought 80- 12 micron, and I'll probably wet/dry up to 2k. then burnish.

 

[SliceOfLife]

I looked on eBay. Seemed the cheapest for a small amount after shipping.

 

[alpster]

Amazon search found a variety of sellers and good prices.

 

[KW Driver]

I spent about $6.50 plus shipping for the above mentioned in 1/4lb increments 80-220-320-500-12m.

I asked because I wanted a known good source.

but thanks to all.

 

[kelbro]

Got grit was my source. Good to have more than one source.