TGN Knots - What Hole Size?

[MaxP]

All-

I've prepared two EverReady handles for re-knotting. Both will get TGN Finest knots.

One has a hole size of about 23.5. That seems about right for a 22mm Finest. Agree?

The other handle is 23.0-24.0. Can I get a 24mm knot in it? I can enlarge it some more if needed.

I'm trying to decide whether to order a 22 and a 24 or two 22's.

Any advice?

 

[GDCarrington]

All-

I've prepared two EverReady handles for re-knotting. Both will get TGN Finest knots.

One has a hole size of about 23.5. That seems about right for a 22mm Finest. Agree?

The other handle is 23.0-24.0. Can I get a 24mm knot in it? I can enlarge it some more if needed.

I'm trying to decide whether to order a 22 and a 24 or two 22's.

Any advice?

Well a 24 mm knot may come in at say 24.5 mm so unless you want to enlarge, order two 22 mm. You might want to order two different types of 22 mm knots for comparison and contrast.

 

[MaxP]

Well a 24 mm knot may come in at say 24.5 mm so unless you want to enlarge, order two 22 mm. You might want to order two different types of 22 mm knots for comparison and contrast.

I can rather easily enlarge it to 24.5.

By two types, do you mean bulb and fan? Or ST-A and Finest?

I have an ST-A as well as a couple Finest already. I prefer the Finest over the ST-A. But, I'm open to recommendations.

 

[GDCarrington]

I can rather easily enlarge it to 24.5.

By two types, do you mean bulb and fan? Or ST-A and Finest?

I have an ST-A as well as a couple Finest already. I prefer the Finest over the ST-A. But, I'm open to recommendations.

You can also go Super Badger.

http://www.thegoldennib.com/index.php?main_page=product_info&cPath=9_44&products_id=297

http://www.thegoldennib.com/index.php?main_page=product_info&cPath=9_44&products_id=168