What is the proper way to open a Schick Eversharp? I'm guessing prying it open with a flathead screwdriver isn't it.
Well my dad picked up two at the antique store the other day and sent them to me. They did have blades in them that were well aged and stuck...
I pried the spring on the bottom enough to "unlock" it so the door on the bottom would swing open so I could clean it easier. It's not broken.
Does the key come with the razor or with a new pack of blades. This is my first experience cleaning up a Schick.
Well at least we have our answers well rehearsed .
They do have a light "tell-tale" arc on the plate. Is that a bad thing?
They do have a light "tell-tale" arc on the plate. Is that a bad thing?
I have several of these razors, and have opened and cleaned them all. I just use a really small screwdriver, apply enough negative pressure to open the spring, clean it and put it back together. One injector I got rattled, when I received it. I opened it, used a pair of pliers to put the correct amount of tension back on the "spring" and it now works fine.
What I ended up doing was sticking a screwdriver through the "hole" on the spring and just popping it out. Took the blades out, cleaned it and popped it back into place. They both rattle a bit, one considerably. I'll buy some blades tomorrow, and use a pliers to correct the tension on the spring. Thanks for the info guys, It's much appreciated.