What's new

Not so sticky Sticky

R

romsitsa

Hello,

found a weird Wilkinson Sticky, one door was raw brass, the other factory nickel. After deassembly found a bubble on the plated door, then realised it can be stripped with a knife. Looks bad, but it will be ok after polishing.
I suspect the layer was too thick and the surface was not properly cleaned.

3FCE0F77-8C73-462B-911B-9EAD6457ED07.jpeg A87F9723-DBAF-46FD-ACAD-2315C5B6A721.jpeg

Adam
 
R

romsitsa

Hello,

plating is not perfect, there is 0,5 mm bare spot on the inside, maybe I messed up while trying to assemble it. Anyhow, it’s such a pain in the a. to de- and reassemble, that I don’t care, it works again.

AFCE2593-1812-4029-BE92-FBF9A6F30372.jpeg A2A7A929-BE00-4A2B-A7CB-F20A2D1EF268.jpeg

Adam
 
Top Bottom