I recently got two Injectors - an E type (not sure what the number is) and an Adjustable?
Wondering which I should try first and thought?
How agressive are the E's?
Wondering which I should try first and thought?
How agressive are the E's?
My first Injector shave - which should I use first?
- Thread starter ElliotR
- Start date
Go with the E. There's no reason to confuse things with an adjustable.
The E is pretty darn aggressive.
The E is pretty darn aggressive.
I would use the E first, as well.
BOTH 
- Thread starter
- #6
Unfortunately the G type (or E type? How do you date these) was too loose the hold the blade _ so I went with the adjustable.
Gotta say... it was an amazing SE shave - smooth like my single edge blades and easy to use ---similar to Gillette Sensor cartridges I used to use, but without the clogging issues I always had with double edge carts. (and none of the irritation issues) I really enjoyed it - had a few weepers so it was NOT my best shave ever but I could see myself using this Injector as my goto daily blade due to how easy it was to use and how smooth it was - never had to worry about blade angle etc
It's kind if the best of both worlds- I'll see how shave #2 goes.
In the meantime does anyone know how to fix an older style loose Injector razor?
Gotta say... it was an amazing SE shave - smooth like my single edge blades and easy to use ---similar to Gillette Sensor cartridges I used to use, but without the clogging issues I always had with double edge carts. (and none of the irritation issues) I really enjoyed it - had a few weepers so it was NOT my best shave ever but I could see myself using this Injector as my goto daily blade due to how easy it was to use and how smooth it was - never had to worry about blade angle etc
It's kind if the best of both worlds- I'll see how shave #2 goes.
In the meantime does anyone know how to fix an older style loose Injector razor?
If it has one patent number and "others pending" it's an E, two patent numbers it's a G.You might be able to press the spring assembly in towrds the frame a little to tighten it up. Did you actually put a blade in it? I have a couple that are a little loose and rattly without a blade, but work OK when a blade is in place.
- Thread starter
- #8
Yeah - I slid a blade in and it fell right out on into the sink. I took a pair of needle nose pliers and squeezed
the spring towards the head and it tightened it up enough to use - gonna have a go with it Thursday morning.
