What's new

Lathering as recommended

I bought a Wee Scott and in the box it says to apply no pressure when making lather to make the brush last. However, I'm not making any good lather that way. Is it true to disregard that advice and apply a little more pressure?
 

musicman1951

three-tu-tu, three-tu-tu
Yes. You need to use some pressure. You certainly don't need to mash the brush flat, but you need to engage more than just the tip. IMHO, of course. I had the same problem when I started to lather. I used it like a paint brush, but I find a bit more pressure is necessary.
 
A hammer will last a long, long time if you just lightly tap nails in and take 20 minutes to hammer in a nail.

I say use the brush to the extent that you NEED to and buy another one when it wears out in a few years.
 
Thanks, got it! I guess I was just falling into a trap of trying to make the brush last a really long time, but I can always get a new one if needed. I should use it in the manner that will create the best lather. I wasn't very happy swirling on the tips barely touching, and taking a long time to build semi-decent lather.
 

Marco

B&B's Man in Italy
Some pressure is necessary in order to get a good lather. Do not worry, your brush will be fine and properly broken-in after a few shaves.
 
All Simpson's brushes carry this recommendation, I think. It's ignored.
Don't all Thater brushes warn against face lathering and use of hot water?
I hate splay and use high density brushes with the tips only to lather like my Duke 3 and 26mm TGN finest anyway.
 
Top Bottom