These are just basic instructions how to open water tank for toilet that is inside the wall
1. Push up from the bottom, and pull top part thoward yourself to remove first plate
Here is located main valve for water supply, if you have some leaks, you can close it here
Mine is located behind white plate, and I have removed small precut piece from it, so now I don't need to dismatle all of it to do that
Piece of plastic I have removed
2. Just remove these 2 clips, they are there to hold those 2 sticks in place
3. Remove these 2 screws (righty tighty, lefty loosie)
4. After removing the second plate, on the third, and last plate push 2 clips on top and pull
Now take out bottom part and remove the last plate. Also this is the plate where I have removed that precut piece of plastic that was covering the main valve, otherwise in emergency you would need to remove everything to close the valve.
Now tou have opened the tank, you can put some chemical inside if you need (I'm putting cleaning tablet) or you can continue dismantaling it for repairs
And to put it back, do the same steps, just in reverse
I hope this was helpful
1. Push up from the bottom, and pull top part thoward yourself to remove first plate
Here is located main valve for water supply, if you have some leaks, you can close it here
Mine is located behind white plate, and I have removed small precut piece from it, so now I don't need to dismatle all of it to do that
Piece of plastic I have removed
2. Just remove these 2 clips, they are there to hold those 2 sticks in place
3. Remove these 2 screws (righty tighty, lefty loosie)
4. After removing the second plate, on the third, and last plate push 2 clips on top and pull
Now take out bottom part and remove the last plate. Also this is the plate where I have removed that precut piece of plastic that was covering the main valve, otherwise in emergency you would need to remove everything to close the valve.
Now tou have opened the tank, you can put some chemical inside if you need (I'm putting cleaning tablet) or you can continue dismantaling it for repairs
And to put it back, do the same steps, just in reverse
I hope this was helpful