I’m selling some gear to fund new purchases. I will reply to inquiries in the order I receive PM's. CONUS shipping costs listed below. If shipping outside CONUS, buyer will pay actual shipping costs. Please use PayPal for payment. Please PM any questions or if you need additional pictures.
RAZORS - Add $6 for shipping one razor, $9 for two.
Diplomat, $100 - Date code A2. Gold wash in very good condition on cap, blade tray, & handle. Very small pitting on safety bar shown in pictures. Mechanics work smoothly. This is one of the smoothest shaving razors Gillette ever made, IMHO. Case outside in good condition, inside is worn, hinges work & snap properly.
Fatboy, $70 - Date code F2. Plating in very good condition on handle, blade tray shows small clouding near safety bars, small clouding on doors. Mechanics work smoothly. Black paint in numbers is at least 90% intact.
Slim, $45 - Date code K2. Plating in very good condition on doors, blade tray, & handle. Mechanics work smoothly. Black paint in numbers is almost all intact.
1946 Milord, $30. Gold wash in good user grade condition. Cap has scuffs & some plate loss on edges, safety bars have plate loss, blade tray & handle in good condition. Case exterior in good condition, hinges work & snap properly, interior in user grade average condition.
Edwin Jagger de89, $25. Excellent condition, presents as new, chrome knurled 3 ½ inch handle.
Weldon Two In One Aluminum Prototype, $25. Each side has a different blade gap (mid-efficient & very efficient) & different tooling on the safety bar. This has quite a bit of blade feel. 24 grams total weight.
SOAP
MdC Original in glass jar, $35. 405 grams total weight, including glass jar & lid. I estimate 50 - 60% remaining. Shipping: add $6
BRUSH HANDLE
Rubberset 400 / 4 aluminum brush handle, $80. I’ve had this handle a long time. I’ve done part of the restoration, following the instructions in the B&B thread “The Rubberset 400 Club” as well as the B&B thread “First Restore-Rubberset 400-3 taking the plunge”. I’ve done the following work:
Removed the ferrule & old knot, dry sand with 220 then 320 grits,
Dry & wet sand with the following grits: 400, 600, 800, & 1000
SCHICK PLUS PLATINUM BLADES - NOS
$5 per package. Sharp, long lasting vintage de blades, 5 blades per package.
Shipping: 1 - 6 packs, add $6; 7 - 20 packs, add $10
BRUSH STORAGE CONTAINERS / TRAVEL TUBES
Aluminum brush storage tubes with removable top cap. Cap has a hole drilled in it. Cap is not threaded, it pushes on & fits snug.
5 1/2" tall, 2" across
Comfortably holds my largest 28mm brushes.
Most are stamped on the bottom "Can Made in England", the remainder are stamped "USA".
Brushes in picture are not included with any purchase, & are not for sale.
Pricing:
Buy 1 - 5: $5 each plus $6 shipping (total of $6, not $6 per piece)
Buy 6 - 10: $4 each plus $10 shipping
Buy 11+: $3 each, shipping cost calculated based on quantity purchased
Diplomat
Fatboy
RAZORS - Add $6 for shipping one razor, $9 for two.
Diplomat, $100 - Date code A2. Gold wash in very good condition on cap, blade tray, & handle. Very small pitting on safety bar shown in pictures. Mechanics work smoothly. This is one of the smoothest shaving razors Gillette ever made, IMHO. Case outside in good condition, inside is worn, hinges work & snap properly.
Fatboy, $70 - Date code F2. Plating in very good condition on handle, blade tray shows small clouding near safety bars, small clouding on doors. Mechanics work smoothly. Black paint in numbers is at least 90% intact.
Slim, $45 - Date code K2. Plating in very good condition on doors, blade tray, & handle. Mechanics work smoothly. Black paint in numbers is almost all intact.
1946 Milord, $30. Gold wash in good user grade condition. Cap has scuffs & some plate loss on edges, safety bars have plate loss, blade tray & handle in good condition. Case exterior in good condition, hinges work & snap properly, interior in user grade average condition.
Edwin Jagger de89, $25. Excellent condition, presents as new, chrome knurled 3 ½ inch handle.
Weldon Two In One Aluminum Prototype, $25. Each side has a different blade gap (mid-efficient & very efficient) & different tooling on the safety bar. This has quite a bit of blade feel. 24 grams total weight.
SOAP
MdC Original in glass jar, $35. 405 grams total weight, including glass jar & lid. I estimate 50 - 60% remaining. Shipping: add $6
BRUSH HANDLE
Rubberset 400 / 4 aluminum brush handle, $80. I’ve had this handle a long time. I’ve done part of the restoration, following the instructions in the B&B thread “The Rubberset 400 Club” as well as the B&B thread “First Restore-Rubberset 400-3 taking the plunge”. I’ve done the following work:
Removed the ferrule & old knot, dry sand with 220 then 320 grits,
Dry & wet sand with the following grits: 400, 600, 800, & 1000
SCHICK PLUS PLATINUM BLADES - NOS
$5 per package. Sharp, long lasting vintage de blades, 5 blades per package.
Shipping: 1 - 6 packs, add $6; 7 - 20 packs, add $10
BRUSH STORAGE CONTAINERS / TRAVEL TUBES
Aluminum brush storage tubes with removable top cap. Cap has a hole drilled in it. Cap is not threaded, it pushes on & fits snug.
5 1/2" tall, 2" across
Comfortably holds my largest 28mm brushes.
Most are stamped on the bottom "Can Made in England", the remainder are stamped "USA".
Brushes in picture are not included with any purchase, & are not for sale.
Pricing:
Buy 1 - 5: $5 each plus $6 shipping (total of $6, not $6 per piece)
Buy 6 - 10: $4 each plus $10 shipping
Buy 11+: $3 each, shipping cost calculated based on quantity purchased
Diplomat
Fatboy
Last edited:
