I got the tip from http://badgerandblade.com/vb/member.php/74023-bluesman-7 in this thread I started recently: http://badgerandblade.com/vb/showthread.php/378714-How-to-heat-treat-a-file
The tip was, give the homebuilt beltgrinder it's own topic, so here it is![Wink ;) ;)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
I'm makning my first real 2x72 beltgrinder. After long searches on the internet and youtube I started to design a grinder that would be easy to fabricate and should do a fine job in grinding and restoring some razors and scales.
Here is the design I'm using ( cm's and inch together to make it easy
)
2014-01-09 17.24.42 by Remco van de Sanden, on Flickr
So I bought some steel:
2014-01-03 11.04.03 by Remco van de Sanden, on Flickr
And i strated to buy the other parts that I would need.
Of course a contact wheel is a must, so I got this one. 8" x 2"![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
2014-01-09 21.35.55 by Remco van de Sanden, on Flickr
2014-01-04 15.44.20 by Remco van de Sanden, on Flickr
The wheel is not 100% flat ion the runningsurface, but nothing a few mm's in a lathe won't cure.
Some knobs, with the long one for the trackingwheel
2014-01-09 21.36.01 by Remco van de Sanden, on Flickr
And some nice stainless handles![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
2014-01-09 21.35.46 by Remco van de Sanden, on Flickr
And nothing can run without a good motor. In this case and industiall 230v, 1HP motor, 1410 rpm, 3 phase is going to be perfect.
2014-01-09 21.36.35 by Remco van de Sanden, on Flickr
And I'm waiting for the postman to deliver this piece to regulate the rpm of the motor![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
1 phase 230v in, 3 phase 230v out
So it's almost tim to start putting it all toghether, which I'll share with you all of course.
Updates coming, enjoy
The tip was, give the homebuilt beltgrinder it's own topic, so here it is
I'm makning my first real 2x72 beltgrinder. After long searches on the internet and youtube I started to design a grinder that would be easy to fabricate and should do a fine job in grinding and restoring some razors and scales.
Here is the design I'm using ( cm's and inch together to make it easy
![Cursing :cursing: :cursing:](/forum/styles/default/xenforo/smilies/yellow_guys/cursing.gif)
![](https://www.badgerandblade.com//forum/proxy.php?image=http%3A%2F%2Ffarm3.staticflickr.com%2F2812%2F11856475814_bb66aa5916_z.jpg&hash=a6898d783d7e01fb3a41f41e5f77633b)
2014-01-09 17.24.42 by Remco van de Sanden, on Flickr
So I bought some steel:
![](https://www.badgerandblade.com//forum/proxy.php?image=http%3A%2F%2Ffarm8.staticflickr.com%2F7317%2F11727989226_323f863e5b_z.jpg&hash=bf255c7610cc062da630584b730c7109)
2014-01-03 11.04.03 by Remco van de Sanden, on Flickr
And i strated to buy the other parts that I would need.
Of course a contact wheel is a must, so I got this one. 8" x 2"
![](https://www.badgerandblade.com//forum/proxy.php?image=http%3A%2F%2Ffarm8.staticflickr.com%2F7457%2F11860040113_f5b5b696c3_z.jpg&hash=35820a29ea74db8dcb320b2c0309bd02)
2014-01-09 21.35.55 by Remco van de Sanden, on Flickr
![](https://www.badgerandblade.com//forum/proxy.php?image=http%3A%2F%2Ffarm8.staticflickr.com%2F7401%2F11753630996_05c6a7c529_z.jpg&hash=1fdadeda24a1d0f12f826cd51e9c7ccd)
2014-01-04 15.44.20 by Remco van de Sanden, on Flickr
The wheel is not 100% flat ion the runningsurface, but nothing a few mm's in a lathe won't cure.
Some knobs, with the long one for the trackingwheel
![](https://www.badgerandblade.com//forum/proxy.php?image=http%3A%2F%2Ffarm6.staticflickr.com%2F5476%2F11859749575_4f83ac3126_z.jpg&hash=d1ec1c1abcb7a9fed31c34cdc883dcfd)
2014-01-09 21.36.01 by Remco van de Sanden, on Flickr
And some nice stainless handles
![](https://www.badgerandblade.com//forum/proxy.php?image=http%3A%2F%2Ffarm4.staticflickr.com%2F3784%2F11859751155_f1ee24e1f7_z.jpg&hash=d0e5016eff2ff6e17e104c3bfcc86021)
2014-01-09 21.35.46 by Remco van de Sanden, on Flickr
And nothing can run without a good motor. In this case and industiall 230v, 1HP motor, 1410 rpm, 3 phase is going to be perfect.
![](https://www.badgerandblade.com//forum/proxy.php?image=http%3A%2F%2Ffarm8.staticflickr.com%2F7374%2F11859748355_771199a537_z.jpg&hash=123c629100e563de02cd7ddc15b024cd)
2014-01-09 21.36.35 by Remco van de Sanden, on Flickr
And I'm waiting for the postman to deliver this piece to regulate the rpm of the motor
1 phase 230v in, 3 phase 230v out
![proxy.php](https://www.badgerandblade.com//forum/proxy.php?image=http%3A%2F%2Fwww.indumex.nl%2Fwinkel%2Fimage%2Fcache%2Fdata%2Ffrequentieregelaars%2FE2-201-H1F-1-250x250.jpg&hash=7582a4e9fe04949bce596c954053727b)
So it's almost tim to start putting it all toghether, which I'll share with you all of course.
Updates coming, enjoy