What's new

AR Pistol/SBR in .300 Black Out build.

nortac

"Can't Raise an Eyebrow"
Very very cool. Just out of curiosity, if you had a shorter barrel or a longer handgaurd, would the Flaming Pig have enough clearance to fit inside the handgaurd?
Not with this particular handgard, which is pretty slender. The Flaming Pig O.D. is about 1.37 in. and not only do you have to clear the F.P. itself, but you need a bit of clearance for any M-lock accesories such as the Ergo handgard strips which protrude into the handgard. Plus, you'd have to remove the handgard if you were to replace or service the Flaming Pig (it comes apart for cleaning) since you couldn't get to it to unscrew it.
 

Claudel Xerxes

Staff member
Not with this particular handgard, which is pretty slender. The Flaming Pig O.D. is about 1.37 in. and not only do you have to clear the F.P. itself, but you need a bit of clearance for any M-lock accesories such as the Ergo handgard strips which protrude into the handgard. Plus, you'd have to remove the handgard if you were to replace or service the Flaming Pig (it comes apart for cleaning) since you couldn't get to it to unscrew it.

Thanks for the info. Good point about leaving clearance for mounting accessories.
 
Top Bottom