Safety Razor Of the Week, 12/14 – 12/20 The 1934 Gillette Aristocrat

Discussion in 'Double Edged Razors' started by thirdeye, Dec 15, 2008.

  1. The 1934 Gillette Aristocrat




    [​IMG]



    This week I would like to take a look at and discuss another one of the unique shavers to the wet shaving world, the grand looking 1934 Gillette Aristocrat.



    [​IMG]


    Ever enthusiastic to improve its products, the Gillette Safety Razor Company launched its One Piece style (known as the Aristocrat model) for the Christmas season of 1934. It was produced until 1940.
    The tried and true Aristocrat model was chosen for the One Piece debut, for the intended success of the respected premiere model could pave the way for later introductions of other, lower-priced models. The Aristocrat at this stage was offered for its high-tech improvements as well as the elegance displayed in the 1920s and early 1930s, and was sold in “heavy gold plate” at a price of $4. The razor was packaged in a leather covered, satin lined case with ten Blue Blades in a matching metal box. The razor featured the distinctive “barber pole” handle knurling reminiscent of the Old Type Bulldog razor.


    [​IMG]



    An early advertisement for the Aristocrat One Piece showed three illustrations of the new device. The first caption read, “A Twist To Open!” The second read, “Drop In Blade.” The final caption read, “Twist It, It’s Closed!”

    Revolutionary in design, the Aristocrat is all one piece. No loose parts, nothing to take down. A twist of the handle opens the cap like a trap door to remove or replace the blade. Another twist locks it in perfect position for shaving.
    The early Aristocrat did not come with end caps nor was the center bar notched at this time and the razor itself weighed in at 2.3 oz.


    [​IMG][​IMG][​IMG]



    As you can see the early version of the 34’ Aristocrat came with no end caps but did show the rivet work showing the jointing. As shown below, near the end of it’s run the 34’ Aristocrat shows up still with no end caps but there are also no visible rivets showing.


    [​IMG]


    The Aristocrat was guaranteed for life. It was built to watchmaker’s standards, every part tested by dozens of different precision gauges costing thousands of dollars which was a lot in the day. This insured smooth operation for a lifetime use. Tested by a special mechanical device, the Aristocrat renders the equivalent of 1000 years and more of service.
    An up-scaled version was also offered. It is the some razor however, it come in a Gold Tone metal case with matching blade box.



    [​IMG]



    A very interesting feature of the Aristocrat is that a slight twist of the handle adjusts it to the special requirements of your beard. The cap is self-aligning, flexes the blade more uniformly – clamps it at just the right angle. These features, coupled with wider guard teeth of new design provide greater safety and a more comfortable shave.

    I find this to be a wonderful shaving razor. It does provide a nice clean smooth shave. One that is very comfortable and I would say it is of a medium aggresiveness.
    If you enjoy open comb razors and like the ease of the TTO, I would say you owe it to yourself to hunt down and give one of these beautiful pieces of history a try.

    Here is my SOTD for today 12/14/2008

    [​IMG]






    Information and pictures have been collected from various sources including the net, (mr razors page), Thank you Achim. The Complete Gillette Collectors Handbook, By Phillip L. Krumholz, The B&B Wiki and my personal photos, thoughts and opinions (which may not be a reflection of the management).



    Any and all information about this razor is more than welcomed.


    Back to Safety Razor of the Week.
     
  2. That's a very nice write up thank you! I was fortunate to acquire one of these recently - it really is a joy to use and it looks beautiful, like the one in your first picture. I oil my razors with silicone vacuum pump oil - this is heavy weight oil that is water repellent and inert and it gives a silky smoothness to the TTO operation.
     
  3. The 30's Aristocrat is a great razor. I am still interested in finding the British analog (#15). But, this is a great smooth shaver.
     
  4. I have one of these beauties, thanks to Ray.

    Beautiful write-up for a beautiful razor.

    It's in my rotation and I love it. May even swap out my current '46 Aristocrat for the 1930s Aristocrat this week, just to celebrate.
     
  5. Wow.. again, a very beautiful razor. I am certainly on the look out for one of these!
     
  6. Coincidentally, I used mine yesterday with QED Violetta and a Swede.... And it was good!
    :smile:
     
  7. scoopster

    scoopster Moderator Emeritus

    Ray, another awesome SROTW! I really liked the inclusion of the manufacturing details and testing. :thumbup:
     
  8. Very nice Ray. You just made me go play with my two sets:tongue_sm
     
  9. Awesome post, Ray! This is my bith-year razor, and I have only seen one, which I currently own. My son bought it for me a while back, and he paid ALOT for it. Mine has been used one time, by me. Ray, if you ever decide to sell yours, please let me know.
     
  10. Have to say this probably my favorite of your Razor of The Week entries so far!
     
  11. Ah, you just missed one that sold buy it now for just under $60 shipped on the bay today. It had the leather type case.
     
  12. very, very nice. a silver one would do me fine, just fine.
     
  13. Ray, fabulous entry. Thank you so much.
     
  14. Ray, a great report on a great milestone Gillette razor. There is something very regal about those barberpole handles, and then when it was applied to a TTO . . . that would have been a real revolution in it's day.

    Regards,
    Tom
     

  15. #%@^^#^^@^*&#*$(#*&!&#(%)#*@&^!%!!!!!!!!!!!!!

    Ahhhh............. there is always another day.
     
  16. Ray, thank you for another great article. Your efforts are much appreciated.:001_smile
     
  17. I have an Aristocrat, along with the blades in the metal box and all. This is a special razor to me as it used to be my Dad's.

    It was really great to learn more about the Aristocrat from your article...thanks, Ray.
     
  18. I just bought a '34 version of this razor from a fellow B&B'er, and it's giving me excellent shaves. I know this is cliche, but there are very few things made like this now - especially in the U.S. These razors are built like tanks.

    Thanks for this write up. I look forward to your weekly offering.
     
  19. very nice and informative review Ray
    but just when I thought I was done with RAD for DE's damm :rolleyes:
     
  20. very nice - thank you!

    I have a 'placeholder' 1934 - most of the plating gone, but still beautiful, solid... very very cool!

    I believe the nearest British version was the #19 (in gold)?
     

Share This Page